The TyKote® Dust-Free Refinishing System is a revolutionary way to prepare floors for recoating. All dust, mess and equipment associated with screening is eliminated. Wood floors can be recoated in one night and put back into use within 24 hours. Tykote takes the place of the messy screening process.
Here are the 3 steps you have to take in this dust-free refinishing process.
Step 1: Clean with IFT
Product: Basic Coatings IFT
I.F.T. is an aggressive cleaner that will easily remove ground-in dirt, body oils, shoe marks, ball scuffs, spilled beverages, etc. I.F.T. is the first step in a two-part cleaning process to prepare floors for the TyKote Dustfree Refinishing System. It provides deep, intensive cleaning, removing household waxes, oils, and polishes. This cleaner also removes tough dirt and grease buildup on floors in restaurant settings.
Product: Basic Coatings Squeaky Concentrate
Squeaky is a pre-cleaner during the finish or recoating process, and it’s the second step in the two-part cleaning process for the TyKote Dustfree Refinishing System. Squeaky is an excellent commercial-grade cleaner for all wood and laminate floors. This cleaner is tough on dirt and gentle on floors, and does its job without leaving a residue.
Step 3: Apply TyKote for maximum bonding and StreetShoe for a perfect finish
TyKote is a revolutionary way to prepare commercial, residential, and sports wood floors for recoating. All dust, mess, and equipment associated with screening are eliminated when using TyKote. Applied in a liquid state, TyKote acts as an intermediate bonding layer between the existing floor and the new topcoat.
TyKote works fast: recoat tonight, back in business tomorrow! Finish the floor with Basic Coatings Streetshoe NXT waterbased finish for best results.